5000w Stedet Svejsning Maskine Home Små Håndholdte 18650 Batteri punktsvejsning Produkt med Høj Effekt
kr503.62
Status: På lager

Antal *
Læg i kurv
btn-share

modname=ckeditor

Når du afgiver en ordre, bedes du venligst udfylde korrekt engelsk adresse ,modtagerens navn , telefonnummer og postnummer.

Shipping liste omfatter stikket på billedet.Hvis det ikke passer i dit land,

bemærk forberede converter ved dig selv.

5000W high-power spot svejser

Punktsvejsning tykkelse: 0.1-0.15-0.2-0.25 mm

Lille volumen og stor magt

Svejsning nålen kan blive fjernet og erstattet Med fuld afgift.det kan spotte svejse tusindvis af pletter.Nuværende er adiustable Let at betjene og learnWelding plet er smuk og fast,

\\

  • Element Type: Skifter
  • Oprindelse: KN(Oprindelse)

Tags: pc-afbrydere, korridor skifte, hovedafbryder med afbrydelse af, cigar plakat, mini rocker switch, spot svejse, baggrund for fødselsdagsfest, 30 års fødselsdag indretning, gratis produkt, kold svejsning.

Genius7887
2020-12-25
2/5
The three digits always mark the same even if the potentiometer is turned, Mark contantly three hundred and peak. I hope it's not the effective working days... Heh, heh. Otherwise it's good. By the way, it is a battery that is recharged by a power adapter with the American type pins so you have to use a plug converter for European plugs. Anyway, to get out of step okay.
Kevin Larson
2021-01-09
5/5
Top top top
Rangiora 4 Life
2021-01-23
5/5
Super es kann 0.2mm schweissen
Ydalova 1980
2021-01-09
5/5
OK. Works.
Kravchuk8080
2021-01-08
5/5
The machine comes with a load of 7.35 v. The voltage of the batteries reads directly on the display on the front side of the case. Before the first use, it is necessary to recharge it (8.35 v displayed). I was able to perform tests with tape of 0,12mm, 0,15mm and 0.20mm. Everything is perfectly welded while respecting the powers indicated on the manual (in Chinese exclusively) glued to the case. For 0.12mm selector on 5, for 0.15mm selector on 6 and for 0.20mm selector on 8. The welds made in this way are very solid. The pedal is supportive of the case. The electrodes are of excellent quality and large diameter wires. The machine comes with 1.35 m of 0.15mm nickel tape and a piece of sandpaper to polish the electrodes if they are blackened. Recharging the case is to do when the displayed voltage is 7.30 v. This machine works perfectly.
Skriv en anmeldelse